Flexible PLA...I thought it was going to be difficult, but it seems to work just fine. We had to alter some of the settings such as nozzle temp (230 C) and print speed (10mm/s) but on the first go the print came out perfect. Now, keep in mind this is a very simple test with no major retractions or overhangs (i.e. no support needed). But the initial results are promising :)
I have included this video because I thought it was cool to see other ultimaker users getting good results from flex PLA
We just sent you an email. Please click the link in the email to confirm your subscription!
OKSubscriptions powered by Strikingly